List Price: $175.89
Sale Price: $175.89
The internal parts of automatic watches are designed to follow the pull of gravity. Therefore, they don't have gears that must be wound with a spring. Instead, their tiny weights get pulled by gravity as you move and swing your arm, so little by little these weights are twisting around both clockwise and counter-clockwise, until your watch is wound up. Watches like this are called automatic or self-winding types, as opposed to quartz kinetic, or mechanical watches.
Hand crafted with high gloss piano finish.
MDF sprayed paint, gloss finishing with plush velvet interior.
New curved front lid design.
First of all, determine your watch which winding directions are required, clockwise or counterclockwise. You may contact your watch manufacturer for watch winding direction requirement information. If you do not know your winding direction requirement, we suggest you to set on''knob 3 .Turn both Clockwise and Counter-clockwise, 6minutes time interval for every 2 minutes counter clockwise +6 Minutes time interval for every 2 mintes clockwise winding to your watch.
1. Put the watch on the watch winder;
2. Plug the AC adaptor into the back of the winder;
3. Turning the control switch knob on the back of the winder;
4. There are 4 modes for the programmable microprocessor to control the time interval of winding cycle as follows:
Mode 1 6 Minutes time interval for every 2 minutes clockwise winding.
Mode 2 6 Minutes time interval for every 2 minutes counter clockwise winding.
Mode 3 6 Minutes time interval for every 2 minutes Counter clockwise winding; + 6 Minutes time interval for every 2 minutes clockwise winding.
Mode 4 180 Minutes time interval for every 10 minutes bi-direction winding.
Cycle will be repeated until power off)
For any winding mode, the rotator (noise level below 5dB)Will turn 6.5-8.0 turns/minute